In electronics and particularly computing, a jumper is a short length of conductor used to close, open or bypass part of an electronic circuit. They are typically used to set up or configure printed circuit boards, such as the motherboards of computers.
- 1 What is a jumper on a circuit board?
- 2 What does jumper mean?
- 3 What is jumper in electrical engineering?
- 4 Where is jumper in motherboard?
- 5 How do you clear CMOS without a jumper?
- 6 What is jumper setting in hard disk?
- 7 What drug is called jumpers?
- 8 How would you describe a jumper?
- 9 What’s another word for jumper?
- 10 What is male to female jumper wires?
- 11 How much current can jumper wires handle?
- 12 How do you run jumper wires?
- 13 Does removing the CMOS battery reset BIOS?
- 14 What will happen if I remove the CMOS battery?
- 15 What is Rtcrst jumper?
What is a jumper on a circuit board?
A circuit board jumper is basically a conductor that gets soldered between two points on the board to make a connection. There are two general reasons for adding PCB jumpers. The first is to correct a defect or implement a change after the board has been defined or assembled.
What does jumper mean?
(Entry 1 of 2) 1 : a person who jumps. 2 : jump shot. 3 : any of several jumping animals especially : a saddle horse trained to jump obstacles.
What is jumper in electrical engineering?
A jumper is a tiny metal connector that is used to close or open part of an electrical circuit. It may be used as an alternative to a dual in-line package (DIP) switch. A jumper has two or more connecting points, which regulate an electrical circuit board.
Where is jumper in motherboard?
Locate the CMOS jumper by referring to the motherboard manual and how to clear the CMOS. In general, the CMOS jumper is three pins located near the battery. In general, CMOS jumper has positions 1–2 and 2–3. Move the jumper from the default position 1–2 to position 2–3 to clear CMOS.
How do you clear CMOS without a jumper?
You may clear the CMOS values by removing the battery:
- Turn off your computer and unplug the power cord.
- Gently remove the battery from the battery holder and wait for one minute. …
- Replace the battery.
- Plug in the power cord and restart your computer.
6 июн. 2009 г.
What is jumper setting in hard disk?
You may have pins on the back of your hard drive that nothing is connected to. These pins are called jumpers, and are used to enable specific types of settings. … You enable particular settings by placing a jumper shunt onto specific pins—creating an electrical circuit between them.
What drug is called jumpers?
This is the song that earned him the «Sugar Man» moniker. Nobody really knows what the «silver magic ships» represent, but the «jumpers» are amphetamines, the «coke» is cocaine, and «sweet Mary Jane» is marijuana.
How would you describe a jumper?
Here are some adjectives for jumper: practised and agile, remarkably quick and good, nice flippant, nice, flippant, particularly shapeless, shrunken maroon, slick synthetic, cutest red, garishly blood-stained, lumpy handmade, safe, fearless, belgian high, loose, simple, mundane nearest, rosy, silken, full striped, …
What’s another word for jumper?
In this page you can discover 18 synonyms, antonyms, idiomatic expressions, and related words for jumper, like: pigtail, sweater, pullover, sock, leggings, jacket, plus-fours, trouser, knee-length, stripey and v-neck.
What is male to female jumper wires?
Types of Jumper Wires
Jumper wires typically come in three versions: male-to-male, male-to-female and female-to-female. The difference between each is in the end point of the wire. Male ends have a pin protruding and can plug into things, while female ends do not and are used to plug things into.
How much current can jumper wires handle?
About 60% of what a male jumper wire could carry.
How do you run jumper wires?
The safest order to attach the jumper cables is as follows:
- Attach one red jumper cable clamp to the positive terminal on the dead battery.
- Attach the other end of the same cable, the second red jumper cable clamp, to the positive terminal on the working (live) car battery.
14 дек. 2016 г.
Does removing the CMOS battery reset BIOS?
Reset by removing and replacing the CMOS battery
Not every type of motherboard includes a CMOS battery, which provides a power supply so that motherboards can save BIOS settings. Bear in mind that when you remove and replace the CMOS battery, your BIOS will reset.
What will happen if I remove the CMOS battery?
The CMOS battery provides power used to save the BIOS settings – this is how your computer knows how much time has passed even when it’s been powered-off for a while – so removing the battery will remove the source of power and clear the settings.
What is Rtcrst jumper?
RTCRST — Clears NVRAM. The NVRAM will be cleared when the jumper is closed (use the jumper from the password bridge (PSWD)). To properly clear, AC power must be applied (not necessarily turned on) to the system for about 10 seconds while the jumper is closed.