A socket attaches to a turning tool to tighten or loosen fasteners, such as a nut or bolt. Sockets are typically sold in sets with a drive tool. Sockets are tools used to tighten mechanical fasteners. They fit over the head of the fastener to provide torque.
- 1 What is a socket set used for?
- 2 What are 5 point sockets used for?
- 3 What tool uses sockets?
- 4 What are 12 point sockets used for?
- 5 Do you need a socket set?
- 6 Can I use impact sockets for everything?
- 7 How are penta head bolts measured?
- 8 What’s the difference between a socket wrench and a ratchet?
- 9 What type of sockets are most commonly used?
- 10 When would you use a socket wrench?
- 11 Are 6 point sockets better?
- 12 Are 12 point sockets bad?
- 13 Is 6 or 12 point socket better?
What is a socket set used for?
A socket set is a versatile and convenient bundle of toolkit accessories that gives users the flexibility to tackle multiple sizes and types of fasteners, primarily aimed at fitting to a diverse range of nuts and bolts.
What are 5 point sockets used for?
The pentagonal socket is for electrical panels.
What tool uses sockets?
A socket wrench is a type of wrench (spanner in British English) that inserts into a socket to turn a fastener, typically in the form of a nut or bolt. The most prevalent form is the ratcheting socket wrench, often informally called a ratchet.
What are 12 point sockets used for?
The additional points make these sockets easier to connect with the heads of fasteners. This is ideal if you are trying to work on a fastener that is hard to see or you cannot see at all. 12 point sockets are also great for use in tight spaces as they allow you to connect to a fastener at more angles.
Do you need a socket set?
About the only time you will use or need a socket set is if you are going to work on your vehicles. If you are only interested in doing basic repairs around your home, No you do not need a socket set. A good set of open end wrenches will suffice as well as a good Crescent type wrench.
Can I use impact sockets for everything?
If it’s there then you can use impact sockets for everything. Without enough room they become useless. Impact sockets do wear out faster because they are softer, but that probably doesn’t matter.
How are penta head bolts measured?
Penta head bolts come in a variety of screw sizes. The penta head it self can vary in size. The heads are measured from bottom flat to top point. Smaller sizes are 9/16″ penta head, larger size is 1″ penta head.
What’s the difference between a socket wrench and a ratchet?
A ratchet is a mechanical device that only allows movement in one direction. When it is equipped onto a wrench, it allows the user to set two turning directions: one where the wrench head is fixed and one where it spins freely. … In fact, many may assume that a ratchet wrench is automatically a socket wrench.
What type of sockets are most commonly used?
Hex sockets are the most common type of socket and come in two main types: hex/6 point sockets and bi-hex/12 point sockets.
When would you use a socket wrench?
A socket wrench or ratchet allows you to turn nuts and bolts with more ease than using a regular wrench. The ratcheting feature allows you to keep the wrench on the bolt eliminating the need to refit the wrench every time you need to make a turn.
Are 6 point sockets better?
Answer: It’s true that 12-point sockets are fine for most lightweight repairs, but heavy wrenching calls for a six-point socket. A six-point socket is much less likely to slip off a stubborn fastener or round over the corners. Here’s why: (1) Six-point sockets have thicker walls, so they’re less likely to flew.
Are 12 point sockets bad?
A 12 point socket on a 6 point fastener is significantly more prone to fail. … There are a few 12 point fasteners in use but they are very rare and when it’s necessary to use a breaker bar in a confined area the 12 point can be necessary. A DIYer would rarely need them though.
Is 6 or 12 point socket better?
A six point socket has much greater contact area and far less prone to round fasteners off. The only advantage a twelve point socket has over a six point is that they will engage twice as often,, handy in tight areas. And can be used on square headed fasteners. Though they do make eight point sockets for them.