The answer is Yes, you can mix RAM sticks and RAM sizes and even different RAM speeds—but mixing and matching RAM modules isn’t the best for system performance. For the best system performance, it is advisable to use RAM sticks by the same manufacturer, of the same size, and of the same frequency.
- 1 Can I use 8GB and 16GB RAM together?
- 2 Can you mix RAM with different timings?
- 3 Can I mix 1.35 V and 1.5 V memory?
- 4 Can I combine 4GB and 8GB RAM?
- 5 Is 32GB RAM overkill?
- 6 Is 2 8GB RAM better than 16GB?
- 7 Can I use 1333mhz and 1600MHz RAM together?
- 8 Is 3200mhz RAM good?
- 9 Does RAM speed have to match?
- 10 Is 1.35 V Ram safe?
- 11 What is the difference between 1.35 V and 1.5 V RAM?
- 12 What happens if RAM voltage is too low?
- 13 Can you use all 4 RAM slots?
- 14 Is it better to have 2 8GB or 4 4GB?
- 15 Does Ram brand matter?
Can I use 8GB and 16GB RAM together?
Yes you can mix memory modules. … I encountered a laptop where the owner had swapped memory modules from other systems to end up with 24GB of memory. It is doable to do 8GB & 16GB in a two slot DDR3 & 4 systems. Just remember if you mix speeds the system will only run as fast as the slowest speed module installed.
Can you mix RAM with different timings?
The timings and maybe even speed are different but the voltages are the same. This one is fairly easy. Simply install only the slowest set of RAM, boot up the system and then enter the BIOS. … Since both the old and new RAM are the same voltage simply manually hard setting the RAM timings to what ever is the slowest.
Can I mix 1.35 V and 1.5 V memory?
Yes, you can use a low voltage RAM module, rated at 1.35 V or 1.25V with a normal RAM module rated at 1.5 V. The Low voltage RAMs (DDR3L) are backwards compatible so they would work with most of the CPU and Motherboard combinations. … Can I mix different brands of RAM if they both have the same speed and voltage?
Can I combine 4GB and 8GB RAM?
Usually you can but it depends on the motherboard. There are chips which are 4GB and 8GB, in dual channel mode this will not work. But you would still get 12GB total only a little slower. … IE you can either use the 4GB RAM or the 8GB RAM but not both at the same time.
Is 32GB RAM overkill?
Those who are rendering large files or doing other memory intensive work, should consider going with 32GB or more. But outside of those kinds of use cases, most of us can get by just fine with 16GB.
Is 2 8GB RAM better than 16GB?
2 8GB sticks will yield roughly 25% more performance over a comparable 16GB stick. Dual channel is always going to be better than single. You will absolutely notice the difference in pretty much all applications that use more than 2GB of memory, which these days is pretty much anything.
Can I use 1333mhz and 1600MHz RAM together?
Yes, you can mix 1333 and 1600 MHz RAM sticks, however the system will downclock all RAM to the speed of the slowest stick. For best performance, try and buy RAM that is the same speed or faster.
Is 3200mhz RAM good?
If you have a Ryzen based system 3200 is a sweet spot in terms of performance and will benefit you very well. “Faster RAM will give your PC better performance in certain specific benchmarks, but in terms of actual benefit to most users, having more RAM available is almost always better than having faster RAM.
Does RAM speed have to match?
yes and no. It will run at the lowest common speed. meaning if you add a 2133mhz stick to your rig, it will downclock itself to that.
Is 1.35 V Ram safe?
We recommend being conservative when increasing DRAM voltage. Increasing voltage too much can damage your system. By default, DDR4 runs at 1.2v, while many memory module kits are rated to run at around 1.35v with XMP. Raise your voltage slowly until your system is stable; we recommend not going above 1.4v to be safe.
What is the difference between 1.35 V and 1.5 V RAM?
1.35 volt (DDR3L) memory and 1.5 volt (DDR3) memory are identical. Manufacturers simply select higher quality modules and configure them as 1.35 volt nominal. All DDR3L modules are fully backwards compatible with DDR3, meaning that 1.35 volt memory will run just fine at 1.5 volts.
What happens if RAM voltage is too low?
It might crash or fail to post. If you can get back into the bios and it’s just unable to pass a stress test just increase the voltage. If it fails to POST you’ll have to reset the CMOS.
Can you use all 4 RAM slots?
it can work but the safest and most stable RAM setup is to have all 8GB or all 4GB to fill up the slots. also having the same RAM brand and speed helps to make it stable. having the 4 8 4 8 RAM setup will probably work but not recommended by RAM manufacturers or motherboard manufacturers.
Is it better to have 2 8GB or 4 4GB?
If your motherboard has 4 slots for RAM, two 4GB sticks is better because you can already have dual channel, meaning faster memory. … If your motherboard only has 2 slots for memory, and you want to upgrade in the near future, get the 8GB stick.
Does Ram brand matter?
Brand doesn’t matter for RAM, the chips are all made by one of three companies anyway.