- 1 What is elevation in engineering drawing?
- 2 How are elevations identified on a working drawing?
- 3 What is an elevation view?
- 4 How do you read engineering drawings?
- 5 How do you plan elevation?
- 6 What is difference between elevation and section?
- 7 How do you read a site plan?
- 8 How do you read a building plan?
- 9 What is plan and elevation in drawing?
- 10 What are different types of elevation?
- 11 What is a design elevation?
- 12 What is the difference between plan view and elevation view?
- 13 What are the 2 types of drawing?
- 14 What are engineering drawings called?
- 15 How do you read 1st and 3rd angle drawings?
What is elevation in engineering drawing?
An elevation drawing is an orthographic projection drawing that shows one side of the house. The purpose of an elevation drawing is to show the finished appearance of a given side of the house and furnish vertical height dimensions. Four elevations are customarily drawn, one for each side of the house.
How are elevations identified on a working drawing?
Each elevation is identified according to the direction that the side is facing, such as ‘North Elevation’ or ‘East Elevation’. Elevations show height dimensions — in particular the Finished Floor Level (FFL) and Finished Ceiling Level (FCL).
What is an elevation view?
Elevation. An elevation is a view of a building seen from one side, a flat representation of one façade. This is the most common view used to describe the external appearance of a building. … Architects also use the word elevation as a synonym for façade, so the «north elevation» is the north-facing wall of the building.
How do you read engineering drawings?
The title block contains information such as:
- Name and address of the company or agency who prepared or owns the drawing.
- Part number and description.
- General tolerances.
- Projection details.
- Scale used in the drawing.
How do you plan elevation?
To draw the initial baseline for the main floor,
- Using your floor plan drawings and starting at the extreme left end of any walls on this side of the house on the ground floor, measure the horizontal distance of this wall. …
- Draw a faint line the same length of this wall towards the bottom left third of your page.
What is difference between elevation and section?
The difference between Interior Elevations and Sections is that Interior Elevations start at the finished floor elevation and stop at the ceiling. Interior Elevations show individual walls in specific rooms, whereas Sections cut through floors showing multiple rooms stacked on top of each other.
How do you read a site plan?
Tips on How to Read a Site Plan
- Find The Title Block. In the bottom right corner of most plans, you’ll find what’s called a title block. …
- Learn the Plan’s Scale. …
- Determine the Orientation of the Plan. …
- Know the Datum Point. …
- Note the Site’s Contours. …
- Locate Existing Structures.
How do you read a building plan?
The Basics: How to Read Architectural Plans
- Be organized and diligent when reading plans. Start in upper left corner and work way across page so as not to miss any details.
- Read the plan cover sheet. …
- There are often reference points that are used between professionals and sets of drawings. …
- Review the plan index which provides a list of all plan sheets.
What is plan and elevation in drawing?
A plan drawing is a drawing on a horizontal plane showing a view from above. An Elevation drawing is drawn on a vertical plane showing a vertical depiction. A section drawing is also a vertical depiction but one that cuts through space showing what lies within.
What are different types of elevation?
Elevations depict how your home will look when viewed from specific angles. There are different types of elevation with respect to these specific angles. Front elevation, side elevations, rear elevations and split elevations are some types.
What is a design elevation?
An elevation sketch is an orthographic projection—a two-dimensional representation of a three-dimensional space. For interior design, it is a two-dimensional drawing of a wall (or series of walls) with varying degrees of detail.
What is the difference between plan view and elevation view?
In basic terms, a plan is a birds-eye view of a space. When drawing a floor plan, the roof would be removed so the interior space can be seen. … An elevation is a view from the side of an object, when drawing interior elevations, this would represent one of the walls.
What are the 2 types of drawing?
There are two types of drawings. The first is a drawing done without instruments, known as a sketch. The second is a drawing done with instruments, known as a final drawing. Sketch Final drawing Artistic drawings convey an idea, feeling, mood or situation.
What are engineering drawings called?
The process of producing engineering drawings is often referred to as technical drawing or drafting (draughting). Drawings typically contain multiple views of a component, although additional scratch views may be added of details for further explanation.
How do you read 1st and 3rd angle drawings?
The difference between first and third angle projection is in the position of the plan, front and side views. In third angle, what you see from the right would be drawn on the right. In first angle, the view from the right would be projected through and drawn on the left.