How do I put 2 RAM sticks in 4 slots?

Which slots to put 2 sticks of RAM in?

Now, logic would suggest that those with two sticks of RAM to install should put them in slots 1 and 3. But listening to logic is silly when building a PC, because most motherboards will probably tell you you need to put them in slots 2 and 4 instead.

How do I activate both RAM slots?

Resolving The Problem

  1. Install the DIMM memory upgrades into empty DIMM memory slots.
  2. Boot the machine and press F1 to get into BIOS, then select Advanced Settings, then Memory Settings, and change the corresponding DIMM slots option to «Row is enabled».
  3. Save the BIOS settings and reboot.

29 янв. 2019 г.

Can you put ram in all 4 slots?

it can work but the safest and most stable RAM setup is to have all 8GB or all 4GB to fill up the slots. also having the same RAM brand and speed helps to make it stable. having the 4 8 4 8 RAM setup will probably work but not recommended by RAM manufacturers or motherboard manufacturers.

Read more  What happens when RAM is defective?

How do I use dual-channel RAM slots?

If you are installing memory in a dual-channel memory motherboard, install memory modules in pairs, filling the lowest numbered slots first. For example, if the motherboard has two slots each for channel A and channel B, numbered 0 and 1, fill the slots for channel A slot 0 and channel B slot 0 first.

Can I put RAM in any slot?

A common misconception about RAM is that you can put any RAM into any slot. You can do that, but it won’t work, or it will work ineffectively. If you have four RAM slots, always buy matched pairs of RAM (two sticks from the same company, same speed, and same capacity) for the best results.

What happens if you put RAM in wrong slots?

If ram is in the wrong slot then it wont boot. If you have two sticks of ram and two slots there is no such thing as a “wrong slot”.

Why wont my RAM slots work?

If all the memory modules appear bad, then the problem is likely with the memory slot itself. Try testing each memory module in each of the memory slots to find if one of the slots is faulty. To fix a faulty slot, you would need to replace your motherboard.

How do I fix RAM not being detected?

What to Do If Your RAM Isn’t Detected By Your PC

  1. Step One: Check The Seating. …
  2. Step Two: Check Your Motherboard’s Compatibility. …
  3. Step Three: Run a Diagnostic like Memtest86. …
  4. Step Four: Clean the Electrical Contacts. …
  5. Step Five: Test It With Other Systems.
Read more  How do I see Ram in Linux?

5 июл. 2017 г.

How do I know if my RAM slot is bad?

The only way to check your motherboard’s memory slots is to place a working RAM stick into each one and see if your machine boots properly. Remove all RAM sticks and place one you know is functional into the first slot on your motherboard.

Is 32 gigs of RAM overkill?

Those who are rendering large files or doing other memory intensive work, should consider going with 32GB or more. But outside of those kinds of use cases, most of us can get by just fine with 16GB.

Which slots should ram go in?

In the case of a motherboard with four RAM slots, it’s probable you’ll want to install your first RAM stick into the slot labeled 1. A second stick should go into Slot 2, which isn’t next to Slot 1. If you have a third stick, it would go into Slot 3, which will actually be between Slot 1 and Slot 2.

Can I add 8GB RAM to 4GB laptop?

If you want to add more RAM than that, say, by adding an 8GB module to your 4GB module, it’ll work but the performance of a portion of the 8GB module will be lower. In the end that extra RAM probably won’t be enough to matter (which you can read more about below.)

How do I know if my RAM is single channel or dual channel?

if your motherboard has 2 ram slots filled, it is dual-channel if it occupies one slot, it is single-channel and if it occupies 4 slots, it is quad-channel.

Read more  Can bad RAM damage motherboard?

Does it matter which way you put RAM in?

the ram should have 1 or 2 indentions on the bottom to help you put it in. it will burn your ram up if you put it in wronge. if it has indentions, some computers have it set so when you put it in and press it down in the slot, the ends will automaticly close completely indicating that you put it in correctly.