the ram should have 1 or 2 indentions on the bottom to help you put it in. it will burn your ram up if you put it in wronge. if it has indentions, some computers have it set so when you put it in and press it down in the slot, the ends will automaticly close completely indicating that you put it in correctly.
- 1 Which way do you put in RAM?
- 2 Does RAM have to be in certain way?
- 3 What happens if you put RAM in wrong slots?
- 4 How do I set my BIOS to new RAM?
- 5 Should I use all 4 RAM slots?
- 6 Can you have two different brands of RAM?
- 7 Which RAM slots to fill first?
- 8 How do I know if my RAM slot is bad?
- 9 Can I put RAM in slots 3 and 4?
- 10 How do I know if my RAM is single channel or dual channel?
- 11 How do I check my RAM speed in BIOS?
- 12 Do I need to update BIOS new RAM?
- 13 How do I check memory in BIOS?
Which way do you put in RAM?
It should easily come out of the slot. Make sure to note the direction of the notch so you know how to insert the new RAM. 20″ and 17″ models (2006 only): Simply pull the RAM outward to remove it, noting its direction so you can properly insert the new RAM.
Does RAM have to be in certain way?
Note that you can only install RAM one specific way. Look at the side of the RAM stick with metal contacts and you’ll see a notch that’s not centered. You’ll need to line that notch up with the notch — also not centered — inside the motherboard’s memory slot. If they’re reversed, the stick will not click in place.
What happens if you put RAM in wrong slots?
If ram is in the wrong slot then it wont boot. If you have two sticks of ram and two slots there is no such thing as a “wrong slot”.
How do I set my BIOS to new RAM?
Look for the «Settings» or «Hardware» menu and click on it. Review the amount of RAM listed in the computer’s BIOS. Make sure that the amount of memory reflects your recent upgrade. Press the appropriate key to save the BIOS settings and exit.
Should I use all 4 RAM slots?
A common misconception about RAM is that you can put any RAM into any slot. You can do that, but it won’t work, or it will work ineffectively. If you have four RAM slots, always buy matched pairs of RAM (two sticks from the same company, same speed, and same capacity) for the best results.
Can you have two different brands of RAM?
As long as the types of Ram you mix are the same FORM FACTOR (DDR2, DDR3, etc) and voltage, you can use them together. … Different brands of Ram are fine to use together.
Which RAM slots to fill first?
If you are installing memory in a dual-channel memory motherboard, install memory modules in pairs, filling the lowest numbered slots first. For example, if the motherboard has two slots each for channel A and channel B, numbered 0 and 1, fill the slots for channel A slot 0 and channel B slot 0 first.
How do I know if my RAM slot is bad?
The only way to check your motherboard’s memory slots is to place a working RAM stick into each one and see if your machine boots properly. Remove all RAM sticks and place one you know is functional into the first slot on your motherboard. Boot your computer.
Can I put RAM in slots 3 and 4?
In the case of a motherboard with four RAM slots, it’s probable you’ll want to install your first RAM stick into the slot labeled 1. … If you have a third stick, it would go into Slot 3, which will actually be between Slot 1 and Slot 2. Finally, a fourth stick would go into Slot 4.
How do I know if my RAM is single channel or dual channel?
if your motherboard has 2 ram slots filled, it is dual-channel if it occupies one slot, it is single-channel and if it occupies 4 slots, it is quad-channel.
How do I check my RAM speed in BIOS?
You can always turn on or restart your computer and load up the BIOS by pressing F2 (setup) or F12 (boot menu) depending on what system you have. Once there, simply scroll or navigate to the RAM or Memory section to check clock speeds and other information.
Do I need to update BIOS new RAM?
There is no need to do it after installing new RAM unless there’s been a BIOS update issued to support your new RAM.
How do I check memory in BIOS?
To determine if your motherboard is “seeing” all of your RAM, enter your computer’s BIOS. To do so, restart your computer and press the key that appears on your screen while booting (often Delete or F2). Locate the system information section and look for information on the amount of RAM in your computer.