Your computer will work just fine if you install the faster RAM. It will simply run at the slower 1333Mhz speed. … For example, if your motherboard supports a maximum of 16GB but it can’t handle RAM sticks larger than 4GB, you’ll need to install four 4GB sticks instead of two 8GB sticks.
- 1 Does motherboard affect RAM speed?
- 2 Can a 3000mhz ram in 2666mhz motherboard?
- 3 Can I use 1600mHz RAM on a 1333mHz board?
- 4 Can I put 3200MHz ram in 2933MHz motherboard?
- 5 Can I put 3200MHz ram in 2400MHz motherboard?
- 6 Is too much RAM bad?
- 7 Can a 2666mhz ram in 2400mhz motherboard?
- 8 Can I use higher frequency RAM than motherboard?
- 9 Does B365 support XMP?
- 10 Which is faster DDR3/1600 or 1333?
- 11 Can I use 1866MHz RAM on 1600MHz motherboard?
- 12 Can I use 1333MHz and 1866MHz RAM together?
- 13 Can I use 3200 and 3600 Ram together?
- 14 Can I mix RAM speeds?
Does motherboard affect RAM speed?
A motherboard doesn’t really have a “speed”, it just has memory speeds that it supports, and it will always be able to support speeds lower than its maximum. As long as you ensure that you’re using the correct type of RAM it will be able to run, no matter what the rated frequency of the RAM is.
Can a 3000mhz ram in 2666mhz motherboard?
No. The RAM will run at the JEDEC standard and work just fine.
Can I use 1600mHz RAM on a 1333mHz board?
The compatibility of the ram depends more on your motherboard than your cpu. If your motherboard supports the 1600mHz, then it is likely that the g3258 will also. However, the cpu spec sheet says that it only supports up to 1333mHz, so if you use 1600mHz sticks it may downclock them to 1333mHz.
Can I put 3200MHz ram in 2933MHz motherboard?
TL;DR Yes, you can. What’s given is: A motherboard that supports DDR4 speeds up to 3200MHz. A CPU that supports DDR4 speeds up to 2933MHz.
Can I put 3200MHz ram in 2400MHz motherboard?
Yes, as long as the motherboard is DDR4 compatible. This means that the sticks are 288 DIMMs and the motherboard supports that. While the label on the RAM kit may say “3200mhz,” that is simply the speed it can run at when overclocked with XMP.
Is too much RAM bad?
Generally there is not harm in having more memory than needed. Maybe the hibernate file can grow too large if you have a small or just full disk. Other than that, there’s no downside to having too much RAM.
Can a 2666mhz ram in 2400mhz motherboard?
If my motherboard supports ram up to 2400mhz, will the 2666mhz still work but bottle-necked at 2400mhz? As long as the speed is higher then you can run it. 2666mhz is just the maximum speed your ram will run at, but it can go any speed below just fine.
Can I use higher frequency RAM than motherboard?
Faster modules may not always run at faster speeds. When the motherboard or processor can’t support the faster memory speed, the modules are clocked at the fastest speed that they can support. For example, a motherboard and CPU that support up to 2133 MHz memory can use 2400 MHz RAM but only run it up to 2133 Mhz.
Does B365 support XMP?
According to mobo manufacturers, B365 is able to use Intel XMP profiles but the ram MT/s speed limit is 2666 and this is what makes my head shake.
Which is faster DDR3/1600 or 1333?
The 1333 and 1600 designations refer to the transfer rates — theoretically, given same CAS latency, DDR3-1600 would perform better than DDR3-1333 due to its greater maximum bandwidth.
Can I use 1866MHz RAM on 1600MHz motherboard?
Memory rated at 1866MHz but motherboard can only handle up to 1600MHz. You can always run memory slower than its rated speed. Depending on the MoBo it may downclock all the way to 1333. In which case you will have to set the timings manually in order to get to 1600.
Can I use 1333MHz and 1866MHz RAM together?
Yes many people will recommend getting matching sticks of RAM, but I almost never run into issues and I mix and match RAM all the time. For example, If you put just one 1866MHz RAM into your motherboard, it will still run at 1333MHz by default until you go into the BIOS and overclock it to 1866MHz.
Can I use 3200 and 3600 Ram together?
Yes you can, and no, it won’t hurt them. Think of 3600 as their tachometer red line. Above that speed, they won’t work well, and might overheat. 3200 is fine.
Can I mix RAM speeds?
The answer is Yes, you can mix RAM sticks and RAM sizes and even different RAM speeds—but mixing and matching RAM modules isn’t the best for system performance. For the best system performance, it is advisable to use RAM sticks by the same manufacturer, of the same size, and of the same frequency.