it’s called dual channel configuration, all modern motherboards are designed so that the ram in the adjacent slot (1-2 and 3-4) use the same “channel” to acquire data from the processor. … Some will still run dual channel even in adjacent slots, but generally, if you want speed, you go in opposite slots.
- 1 Can I put my RAM in slots 2 and 4?
- 2 Is it better to use 2 or 4 RAM slots?
- 3 Can you mix and match RAM?
- 4 Can you put ram in all 4 slots?
- 5 Can I put RAM in slots 3 and 4?
- 6 Can I add 8GB RAM to 4GB laptop?
- 7 Is 32GB RAM overkill?
- 8 Is it better to have 1 or 2 RAM sticks?
- 9 Is 4 8GB of RAM good?
- 10 Can I mix 2 different brands of RAM?
- 11 Can I use 1333mhz and 1600mhz RAM together?
- 12 Can you use two different RAM speeds?
- 13 Is it bad to fill all RAM slots?
- 14 What happens if you put RAM in wrong slots?
- 15 Why are there 4 RAM slots?
Can I put my RAM in slots 2 and 4?
If you add another pair of matched RAM sticks, they should go in 1 and 4. The manual has it in slots 2 and 4, not 1 and 2. with that being said, obviously 2 and 4 are dual channel, as well as 1 and 3.
Is it better to use 2 or 4 RAM slots?
General rule with Ryzen is always to prefer 2 sticks over 4. If you want 32GB get 2x16GB. 2x8GB will have better timings/speeds though. the more physical chips on the dimm, the denser the routing and the worse signal integrity you get.
Can you mix and match RAM?
The answer is Yes, you can mix RAM sticks and RAM sizes and even different RAM speeds—but mixing and matching RAM modules isn’t the best for system performance. For the best system performance, it is advisable to use RAM sticks by the same manufacturer, of the same size, and of the same frequency.
Can you put ram in all 4 slots?
it can work but the safest and most stable RAM setup is to have all 8GB or all 4GB to fill up the slots. also having the same RAM brand and speed helps to make it stable. having the 4 8 4 8 RAM setup will probably work but not recommended by RAM manufacturers or motherboard manufacturers.
Can I put RAM in slots 3 and 4?
In the case of a motherboard with four RAM slots, it’s probable you’ll want to install your first RAM stick into the slot labeled 1. … If you have a third stick, it would go into Slot 3, which will actually be between Slot 1 and Slot 2. Finally, a fourth stick would go into Slot 4.
Can I add 8GB RAM to 4GB laptop?
If you want to add more RAM than that, say, by adding an 8GB module to your 4GB module, it’ll work but the performance of a portion of the 8GB module will be lower. In the end that extra RAM probably won’t be enough to matter (which you can read more about below.)
Is 32GB RAM overkill?
Those who are rendering large files or doing other memory intensive work, should consider going with 32GB or more. But outside of those kinds of use cases, most of us can get by just fine with 16GB.
Is it better to have 1 or 2 RAM sticks?
Generally, a single 8GB is preferable. If you have two slots, you have the potential to upgrade by filling the second slot. However, if you are pretty certain that 8GB will be enough (and it probably will be), and a pair of 4GBs is cheaper than a single 8GB, then go for the pair.
Is 4 8GB of RAM good?
Usually you can but it depends on the motherboard. There are chips which are 4GB and 8GB, in dual channel mode this will not work. But you would still get 12GB total only a little slower. Sometimes you will have to swap the RAM slots since the detection has bugs.
Can I mix 2 different brands of RAM?
As long as the types of Ram you mix are the same FORM FACTOR (DDR2, DDR3, etc) and voltage, you can use them together. … Different brands of Ram are fine to use together.
Can I use 1333mhz and 1600mhz RAM together?
Yes, you can mix 1333 and 1600 MHz RAM sticks, however the system will downclock all RAM to the speed of the slowest stick. For best performance, try and buy RAM that is the same speed or faster.
Can you use two different RAM speeds?
You can use memory modules of different speeds as long as they are faster than those specified for your computer. It is recommended to use modules of the same speed as those already installed in your system. If you do mix speeds, the modules will all run at the speed of your slowest modules.
Is it bad to fill all RAM slots?
It depends on your system. If it supports dual channel memory only, there is no advantage to installing more than 2 modules. If it supports 4 channel memory, installation 4 modules will perform better.
What happens if you put RAM in wrong slots?
If ram is in the wrong slot then it wont boot. If you have two sticks of ram and two slots there is no such thing as a “wrong slot”.
Why are there 4 RAM slots?
You can use all four slots just fine. Depending on the exact RAM and CPU you may have to set the RAM slightly slower, or the BIOS will do it automatically. … If you get an LGA2066 board and use 4 Core CPU then you can only use 4 of the 8 slots. This is because 4 core CPUs on LGA2066 have only two memory controllers.