If you do mix RAM sizes, you should use them together. For example, you can use one RAM stick that is 3GB and another that is 6 GB. When you are in Flex Mode (or dual-channel mode), the RAM will perform like two 3GB RAM sticks in order to optimize performance. If you do mix RAM sizes, you should use them together.
- 1 Can I mix different RAM sticks?
- 2 Is it bad to mix RAM Reddit?
- 3 What happens if you mix RAM sticks of different speeds?
- 4 Does it matter what RAM stick I use?
- 5 Is 32GB RAM overkill?
- 6 Is it okay to put 4GB and 8GB RAM together?
- 7 Can you mix old New Ram?
- 8 Does RAM speed need to match?
- 9 Does RAM timing have to match?
- 10 Can I use 1333mhz and 1600MHz RAM together?
- 11 Can you use all 4 RAM slots?
- 12 What happens if you add two RAM sticks to your PC and one has a bad SPD?
- 13 How many sticks of RAM do you need?
- 14 Does RAM have to be in first slot?
- 15 Does it matter which M 2 slot you use?
Can I mix different RAM sticks?
The answer is Yes, you can mix RAM sticks and RAM sizes and even different RAM speeds—but mixing and matching RAM modules isn’t the best for system performance. For the best system performance, it is advisable to use RAM sticks by the same manufacturer, of the same size, and of the same frequency.
Is it bad to mix RAM Reddit?
You can mix ram safely so long as they have the same speed and timings.
What happens if you mix RAM sticks of different speeds?
If you do mix speeds, the modules will all run at the speed of your slowest modules. For example, for a DDR2 667MHz system you could add 800MHz modules, they will run at the 667 speed. You cannot mix DDR, DDR2, DDR3 in a system as each technology requires a different type of socket.
Does it matter what RAM stick I use?
The RAM itself does not matter no, but the slots on the motherboard that you use does. There are two slots that are used for the heap memory, meaning the computers temporary variables, and the other two are used solely for logical storage. … BUT if you can, I would upgrade to 8GB chips for 32GB RAM, thats what I have.
Is 32GB RAM overkill?
Those who are rendering large files or doing other memory intensive work, should consider going with 32GB or more. But outside of those kinds of use cases, most of us can get by just fine with 16GB.
Is it okay to put 4GB and 8GB RAM together?
Usually you can but it depends on the motherboard. There are chips which are 4GB and 8GB, in dual channel mode this will not work. But you would still get 12GB total only a little slower. … IE you can either use the 4GB RAM or the 8GB RAM but not both at the same time.
Can you mix old New Ram?
As long as it’s all the same type. Assuming your new PC is using DDR3 RAM, you’ll need to make sure that your old RAM is also DDR3. You’ll find out when trying to insert it; either it’ll fit, or it wont. Keep it to matched pairs.
Does RAM speed need to match?
yes and no. It will run at the lowest common speed. meaning if you add a 2133mhz stick to your rig, it will downclock itself to that.
Does RAM timing have to match?
Mainly you just need to be sure that you match the voltage (though some chips will run at higher or lower voltages it is best to match all modules for stability) — then you should also match the speed (ie. PC3200) since mismatching this will waste money (ie.
Can I use 1333mhz and 1600MHz RAM together?
Yes, you can mix 1333 and 1600 MHz RAM sticks, however the system will downclock all RAM to the speed of the slowest stick. For best performance, try and buy RAM that is the same speed or faster.
Can you use all 4 RAM slots?
it can work but the safest and most stable RAM setup is to have all 8GB or all 4GB to fill up the slots. also having the same RAM brand and speed helps to make it stable. having the 4 8 4 8 RAM setup will probably work but not recommended by RAM manufacturers or motherboard manufacturers.
What happens if you add two RAM sticks to your PC and one has a bad SPD?
What happens if you add two RAM sticks to your PC, and one has a bad SPD? A. When your system boots, it will recognize both RAM sticks but will not register any special features (such as ECC) of the stick with the bad SPD.
How many sticks of RAM do you need?
In general, we recommend at least 4GB of RAM and think that most users will do well with 8GB. Choose 16GB or more if you’re a power user, if you run today’s most demanding games and applications, or if you simply want to make sure you’re covered for any future needs.
Does RAM have to be in first slot?
The manual recommends putting ram in slot 1 & 3 first then 2 & 4. The evo will block the first slot a little. If you need to just use slot 2 &4. Should be fine.
Does it matter which M 2 slot you use?
According to the latest manual it should not matter which of the two ports that you utilize. Unfortunately it does not state which of the ports share with which of the PCIe slots it only shows which of the ports share with the SATA ports.