Can I use 1333 and 1600 Ram together?

2 Answers. Yes, you can mix 1333 and 1600 MHz RAM sticks, however the system will downclock all RAM to the speed of the slowest stick. For best performance, try and buy RAM that is the same speed or faster.

Is there a big difference between 1333 and 1600 Ram?

Anyway, when building a new system there is very little difference between 1333Mhz sticks and 1600Mhz sticks. At least that is the case here. In fact the faster sticks are usually cheaper if you’re looking for 8GB modules.

Can I use 800MHz and 1600mHz RAM together?

This is of course assuming that the 800MHz RAM is actually DDR3–800MHz, if on the other hand, it is DDR2L-800MHz, it won’t even fit in the socket and ramming it in the socket will damage the motherboard. So you can definitely not use DDR3–800MHz and DDR3L-1600MHz simultaneously in a single laptop.

Can you mix different Rams?

As long as the types of Ram you mix are the same FORM FACTOR (DDR2, DDR3, etc) and voltage, you can use them together. They can be different speeds, and made by different manufacturers. … Different brands of Ram are fine to use together.

Read more  Why is 6gb of 8gb RAM usable?

Can I use 1066 and 1333 Ram together?

2 Answers. Both memory modules should work and operate at 1066 MHz. If properly supported, the modules will operate in dual-channel mode, but both modules will be limited to the slower one, which is unlikely to be noticeable. There should not be any significant problems in terms of system performance or stability.

Is 1600 RAM speed good?

In general it is good enough and it actually is the fastest kind of memory supported on locked Intel motherboards before socket 1151. Though if you have a Z87/Z97 motherboard and unlocked K cpu, then getting memory faster than 1600MHz can be beneficial.

Which RAM is faster 1333 or 1600?

The 1333 and 1600 designations refer to the transfer rates — theoretically, given same CAS latency, DDR3-1600 would perform better than DDR3-1333 due to its greater maximum bandwidth.

Can I put 1600MHz ram in a 1066MHz slot?

So the answer is that 1600 Mhz memory modules may not work in a slot that supports only upto 1066 Mhz. However the 1333 Mhz RAM worked.

Can I use 1600MHz RAM on a 1066MHz board?

Yes , but RAM speed will be only 1333mhz at max if it is only the one stick being used . … both RAMs will run at same speed. If ur first RAM is operating at max 1066mhz then no matter what ,your new RAM will also run at 1066 And the rest of the story anyone can understand of course.

How do I overclock my RAM?

There are three main ways to begin overclocking memory: increasing the platform’s BCLK, directly commanding an increase in the memory’s clock rate (multiplier), and changing the timing/latency parameters.

Read more  What to do if you run out of RAM?

Can I combine 4GB and 8GB RAM?

Usually you can but it depends on the motherboard. There are chips which are 4GB and 8GB, in dual channel mode this will not work. But you would still get 12GB total only a little slower. … IE you can either use the 4GB RAM or the 8GB RAM but not both at the same time.

Is 32GB RAM overkill?

Those who are rendering large files or doing other memory intensive work, should consider going with 32GB or more. But outside of those kinds of use cases, most of us can get by just fine with 16GB.

Can I add 8GB RAM to 4GB laptop?

If you want to add more RAM than that, say, by adding an 8GB module to your 4GB module, it’ll work but the performance of a portion of the 8GB module will be lower. In the end that extra RAM probably won’t be enough to matter (which you can read more about below.)

Can I use 1866Mhz RAM on 1333?

It should work, yes. But, it will run at the lower 1333Mhz speed if your board does not support 1866Mhz.

Does RAM speed have to match?

yes and no. It will run at the lowest common speed. meaning if you add a 2133mhz stick to your rig, it will downclock itself to that.

Can I use faster RAM?

Your computer will work just fine if you install the faster RAM. It will simply run at the slower 1333Mhz speed. Your motherboard will recognize those faster RAM sticks as being compatible (because they are) and allow the system to boot up and operate normally after you install them.